Tuesday 16 January 2018

How to Use MPO/MTP Cassettes for 10G, 40G & 100G Connectivity?

Data centers networks are changing significantly to accommodate the drive and demand for faster access to virtualised networks and cloud computing. Fiber and particularly pre-terminated fiber is now dominant in today’s data centres and high speed networks because of bandwidth capabilities, port density, security, upgradability and ease of installation. Within the pre-terminated fiber portfolio, MPO/MTP based networking has established itself as the leading technology. In this article, the knowledge of MPO/MTP cassette and how it is used for 10G, 40G and 100G connectivity will be introduced.
 
Three Common MPO/MTP Cassettes Overview
MPO/MTP cassette is a modular module which enables users to take the fibers brought by a trunk cable and distribute them to a duplex cable. As a pre-terminated fiber product, MPO/MTP cassettes are loaded with 12 or 24 fibers and have LC or SC adapters on the front side and MPO/MTP at the rear, this is to say, inside a standard MPO/MTP cassette module, there is a hydra cable. Since the interface of today’s most popular 10G optics is LC connector, at present, the three most widely used MPO/MTP cassettes are 1xMTP(12-Fiber) to 6xLC duplex cassettes, 2xMTP(2*12-Fiber) to 12xLC duplex cassettes and 1xMTP(24-Fiber) to 12xLC duplex cassettes. 
 
MPO/MTP Cassette for 10G Connectivity
For 10G connectivity, MPO/MTP cassette is used to connect 10G device to 10G device. As we know, if the distance between the two 10G devices is short, we can use a duplex LC patch cords for direct connection. However, if the distance is too long, we may have to use MPO/MTP cassette for interconnection or cross connection. 1xMTP(12-Fiber) to 6xLC duplex cassettes, 2xMTP(2*12-Fiber) to 12xLC duplex cassettes and 1xMTP(24-Fiber) to 12xLC duplex cassettes can be all used for 10G connectivity. 
 
MPO/MTP Cassette for 40G Connectivity
For 40G connectivity, MPO/MTP cassette is used to connect 10G device to 40G device. In 10G upgrade to 40G connectivity scene, if the distance between the 10G device and the 40G device is short, we can use a MTP-4 duplex LC patch cords for direct connection. However, if the distance is too long, we may also have to use MPO/MTP cassette for interconnection or cross connection. 1xMTP(12-Fiber) to 6xLC duplex cassettes, 2xMTP(2*12-Fiber) to 12xLC duplex cassettes and 1xMTP(24-Fiber) to 12xLC duplex cassettes can be all used for 40G connectivity. 
 
MPO/MTP Cassette for 100G Connectivity
For 100G connectivity, MPO/MTP cassette is used to connect 10G device to 100G device. In 10G upgrade to 100G connectivity scene, if the distance between the 10G device and the 100G device is short, we can use a MTP-10 duplex LC patch cords for direct connection. However, if the distance is too long, we may have to use MPO/MTP cassette for interconnection or cross connection. 1xMTP(12-Fiber) to 6xLC duplex cassettes, 2xMTP(2*12-Fiber) to 12xLC duplex cassettes and 1xMTP(24-Fiber) to 12xLC duplex cassettes can be all used for 100G connectivity. 
 
fiber-mart.COM MPO/MTP Cassettes Solutions
 
fiber-mart.COM offers a wide range of MTP/MPO cassettes including single-mode or multimode 1xMTP(12-Fiber) to 6xLC duplex cassettes, 2xMTP(2*12-Fiber) to 12xLC duplex cassettes and 1xMTP(24-Fiber) to 12xLC duplex cassettes, which allows for rapid deployment of high density data center infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. Besides, the fiber enclosure is also provided, which can hold three LGX MTP/MPO cassettes.

No comments:

Post a Comment

How to Understand PoE and PoE+ Switches

by www.fiber-mart.com Power-over-Ethernet (PoE) is the technology that allows network switches to transmit power and data through an Ethe...