Fiber optic cable is unlike most types of cables; it draw on light instead of electricty to transmit signals. As you have already known, the light is the fasterst way to transfer information, and fiber optic cable has additional advantages are immune to electrical interference. So, you can run it anywhere and at any time. Because light meets litter or no resistance, you can run the fiber optic cable in a long distance, literally countries apart, without increasing or clean signal. Imagination process thousands of miles away. It will be impossible.
Optical fiber velocity also has its own advantages. It has a cleaner signal than conventional copper wire and transmit signals over 10 gb/s. Put it into perspective, fiber optic wiring is digital information as an electrical wiring is analog information. They are completely different.
At present, the fiber optic cable used to connect to the network, basically make the short run, the connection layer, construction and connection electric copper cable, fiber optic cable through the Ethernet converters. Despite the fiber optic cable can be very expensive, but because it is becoming more and more popular, it will be, the price of fiber optic cable (and related equipment including Ethernet converter and fiber optic transceiver) should be reduced.
Knowing what’s inside this very functional invention is good to know. A fiber optic cable including the core, cladding, strength member, buffer and jacket as its components. Let’s get to know them more!
Core cable to the path of the transmitted light can flow, by one or more of the glass or plastic fiber. The cladding which provides a refractor light beam reflected back to the core, to continue its journey is usually made of plastic. The buffer consists of one or more layers of plastic and strengthens the cable and prevents damage to the core. As the same implies, the strength members very hard materials, such as glass fiber, steel or kevlar, and provides additional strength for the cable. Finally, the jacket which can either be plenum or non plenum is the outer convering or shield of the cable.
Fiber optic cable comes in two forms: single mode and multi mode. Because single mode cable is so narrow, light can only travel through it in a single path. This cable is very expensive and is hard to work with. Multi mode cable, on the other hand, there are a wide range of core diameter of the optical flow of the freedom to travel several paths.
Unfortunately, the multipath configuration multimode optical fiber allows the possibility of signal distortion at the receiving end.
Sometime in your connection, you will come across connecting either a single mode or multi mode fiber optic cable to conventional copper cable. This can be a problem which can cut the communication you have already established. But you don’t have to worry as there are Ethernet converters and transceiver modules that serve to router, boost, and deliver the signals across these two opposite cables. On top of these, there are other related devices such as gigabit converters and SFP mini GBICs readily available on the market that you might find useful in your network.
No comments:
Post a Comment