4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

FM SKU#:SKU00021L1
Model#:FM-POE3603
link: http://www.fiber-mart.com/4port-101001000m-poe-switch-with-1port-1000m-fx-p-3576.html

4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data –equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
FM-POE3603 is a 5 port (1FX+4TP) 10/100/1000M PoE (PSE) Ethernet Switch. The optical fiber port can greatly extend the transmission distance limitation of normal CAT5e UTP cable. All the four 10/100/1000Mbps UTP RJ-45 ports supports full duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode). Complied with IEEE802.3at and IEEE802.3af standard, the PoE(PSE) Ethernet Switch is a Power Sourcing Equipment (PSE) which combines data transfered over cable with 48V (typical) power supply, providing power to IEEE802.3at /IEEE802.3af powered device (PD) over CAT5e UTP cable (cable length up to 100meters /330feets). All the four UTP RJ-45 ports are organized to be PoE output port and each PoE port can output up to 60Watts (DC 48V/1.2A) power into CAT5e twisted-pair cable.

Key Features

Support one 1000Base-FX fiber optical port and four 10/100/1000Base-T UTP RJ-45 ports

4 ports IEEE802.3at /IEEE802.3af PoE/PSE output

high power output up to 60Watts per port

Support IEEE 802.3z/AB 10/1001000Base-T and 1000Base-SX/LX/ZX standards

Supports IEEE 802.3x flow control - Supports 9216 bytes jumbo packet length

Built-in 1Mbits SRAM for packet buffer, with 4K-entry lookup table

Low power consume, low heat, and good reliability

Choice of SC, SFP, BiDi or other connectors for multimode and singlemode

Specifications

Data Rates	10/100/1000Mbps(IEEE802.3z/AB 10/100/1000Base-T)
1000Mbps (1000Base- SX/LX/ZX)
Input Power Requirements
Input voltage	Input voltage
Power over Ethernet Output
Pin Assignment and Polarity	1/2 (V+),3/6 (V-) output power ≤30Watts
1/2 /4/5(V+),3/6/7/8 (V-) output power >30Watts
Environmental Conditions
Operating temperature	0℃ to 40℃
Cooling	free air convection
Storage temperature	-20℃ to +85℃
Operating Humidity	90% max, non-condensing
Mechanical Specifications
Case Material	Iron
Case Color	Silver grey
Net Weight	410g approx. /unit
(Do not include external power adaptor)
Dimensions	158(W) x 27(H) x 95(L) (mm)
(Do not include transceiver length)
Connectors
DC Inlet	DC470-2.0
LAN	4 port Shielded RJ-45

Ordering Information

P/N	Description	X	X	X	X	X	X	X
FM-POE3603-XX-XXXX	4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx	T:	1:15.4W	2: 2port POE	S: Duplex Single-mode	3: TX 1310nm	S: SC	05: 550M
IEEE802.3at	2: 25W	4: 4port POE	M: Duplex Multi-mode	4: TX 1490nm	F: FC	2: 2KMM
F:	3: 30W		B: Simplex Single-mode	5: TX 1550nm	T: ST	20: 20KM
IEEE802.3af	5: 50W		SFP: SFP Slot	8: TX 850nm	L: LC	40: 40KM
N:
Non－standard

Data Rates	10/100/1000Mbps(IEEE802.3z/AB 10/100/1000Base-T)
1000Mbps (1000Base- SX/LX/ZX)
Input Power Requirements
Input voltage	Input voltage
Power over Ethernet Output
Pin Assignment and Polarity	1/2 (V+),3/6 (V-) output power ≤30Watts
1/2 /4/5(V+),3/6/7/8 (V-) output power >30Watts
Environmental Conditions
Operating temperature	0℃to 40℃
Cooling	free air convection
Storage temperature	-20℃to +85℃
Operating Humidity	90% max, non-condensing
Mechanical Specifications
Case Material	Iron
Case Color	Silver grey
Net Weight	410g approx. /unit
(Do not include external power adaptor)
Dimensions	158(W) x 27(H) x 95(L) (mm)
(Do not include transceiver length)
Connectors
DC Inlet	DC470-2.0
LAN	4 port Shielded RJ-45