Blockless Fiber PLC Splitter, Singlemode, 900μm Fiber, SC/LC/FC/ST, UPC/APC Connector
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.
Blockless PLC splitter has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It's mainly used for various connection and distribution boxes or network cabinets.
Blockless PLC splitter has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It's mainly used for various connection and distribution boxes or network cabinets.
| Features | Application |
| Blockless PLC Splitter, SC/LC/FC/ST, UPC/APC Connector | Optical Signal Distribution |
| 900μm ITU G.657A1 for fiber input/output | Data Communications |
| Low insertion loss | Lan and CATV System |
| Low polarization dependent loss (PDL) | FTTX Deployment |
| Operating bandwidth: 1260 - 1650nm | FTTH Network |
| Compact design, suitable for installation in optical equipments | Passive Optical Networks (PON) |
| Wide Operating Temperature: -40 - 85°C, support industry standard applications | Measuring System and Laser System |
| High reliability and stability, Telecordia GR-1221/1209 compliant | DWDM and CWDM Systems |
Telcordia 1209 & 1221 Test Results
Name of the test | Condition | Duration |
Temperature- Humidity aging | 85°C and 85%RH | 7 days |
Vibration | 10 - 55Hz, 1.52mm double amplitude, in three axes | 1 hour |
Component Impact | Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse | 2 impacts |
Temperature Cycling Test | -40 - 70°C, Ramp rate: 1°C/min, Dwell time > 15min | 10 cycles |
Temperature- Humidity cycling | -40 - 85°C , between 10°C and 23°C - 85%RH, at 85°C - 20%RH, between °C and 85°C - maintain a linear change in RH, below 10°C - uncontrolled RH | 14 days |
Water Immersion | 43 ± 2°C , PH 5.5 ± 0.5 | 7 days |
Fiber Side Pull test | 0.23 kg load, 90° angle , 2 directions | 5 seconds |
Fiber Side Pull test | 0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs | 5 seconds |
Compact design, suitable for installation in outdoor fiber distribution box
The blockless splitter features small size, which is an intermediate choice between volume miniaturization and reliable fiber protection. It is suitable for installation in your system design and manufacturing. Many of our OEM customers in the FTTH, FTTX, PON, GOPN get the blockless splitters together with FS-FDB-16 outdoor fiber distribution box. Contact with sales@fiber-mart.com for complete application.
Fiber-MART.COM provides whole series of 1×N and 2×N splitter products that are tailored for specific applications
Standard configurations include 1×4, 1×8, 1×16, 1×32 and 1×64 configurations, as well as custom 2xN configurations.
We offer them as plain devices with or without connectors but as well packaged according to your specific needs in 1RU 19” chassis, standard LGX cassettes, splice pigtailed ABS modules, etc.
Contact sales@fiber-mart.com to make PLC splitters in your special needs.
We offer them as plain devices with or without connectors but as well packaged according to your specific needs in 1RU 19” chassis, standard LGX cassettes, splice pigtailed ABS modules, etc.
Contact sales@fiber-mart.com to make PLC splitters in your special needs.
Make to Order
PLC | Port Configutation | Package Style | Fiber Diameter (Input/Output) | Connector (Input/Output) | Pigtail Length |
PLC=PLC Splitter | 102=1×2 | ST=Steel tube, bare fiber | 25=250μm | NO=None | 15=1.5m |
104=1×4 | MM=Mini module | 90=900μm | SCA=SC/APC | 20=2.0m | |
108=1×8 | FO=With fan-out | 20=2.0mm | SCU=SC/UPC | 30=3.0m | |
116=1×16 | ABS=Pigtailed ABS box | 30=3.0mm | LCA=LC/APC | XX=Customized | |
132=1×32 | MP=Mini plug-in type | LCU=LC/UPC | |||
164=1×64 | LGX=Standard LGX | FCA=FC/APC | |||
202=2×2 | TR=Mounted on a Fiber Splice Tray | FCU=FC/UPC | |||
204=2×4 | 1U=1U 19” rack mount chassis | STA=ST/APC | |||
208=2×8 | STU=ST/UPC | ||||
216=2×16 | X=Customized | ||||
232=2×32 | |||||
264=2×64 |
Notes for above:
1. When package style is ST, fiber diameter could be only 25=250um, connector could be only NO=none.
2. When package style is MM & FO, fiber diameter could be only 900um.
3. When package style is AB, fiber diameter could be 90=900um, 20=2.0mm, 30=3.00mm for optional.
4. When package style is MP, LGX, TR and 1U, "fiber diameter for input/output" & "pigtail length" could be left out, as the specific product would be made according to its configuration.
2. When package style is MM & FO, fiber diameter could be only 900um.
3. When package style is AB, fiber diameter could be 90=900um, 20=2.0mm, 30=3.00mm for optional.
4. When package style is MP, LGX, TR and 1U, "fiber diameter for input/output" & "pigtail length" could be left out, as the specific product would be made according to its configuration.
----------------------------------------------------------------------------------------------------------------------------------------------------------
About FIBER-MART(Fiber-Mart.COM)
FIBER-MART(Fiber-Mart.com), based in HongKong & U.S., belongs to SUNMA Group, a worldwide leading
supplier in fiber optic network, fttx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing,
fiber blowing & integrated network solutions. devoting on the research & development, design, manufacture,
and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always
engaged in high-performance and innovation.
Our goal is to create value for our customers continuously with high-quality products and excellent services
in the field of optical communication.
No comments:
Post a Comment